AP80SY
LED Backlight Controller
Features
0 7V to 27V input voltage range
0 High power current mode DC/DC boost controller
0 100Hz to 1kHz Dimming Frequency
0 Internal 5V/12V Voltage Regulator
0 Programmable LED current
0 Programmable Slope compensation
0 Protections:
0 Open LED Protection (OLP)
原厂供应:线性IC,驱动IC,降压IC,供应大功率升压恒流芯片,恒流降压IC联系欧阳: QQ:
0 Short LED Protection (SLP)
0 Switch Over Current Protection (OCP)
0 Output Over Voltage Protection (OVP)
0 Over Temperature Protection (OTP)
0 SOP-10 Package
0 RoHS Compliant
General Description
The AP80SY is a current mode LED driver and boost controller. The PWM DIM input not only drives the load PWM switch, but also enables NDRV switching and error amplifier operation. This feature provides ex-tremely fast, true PWM load switching. External cur-rent sense resistor and slope compensation resistor make it flexible for various applications.
An ISEN pin is used for programming LED current. A high contrast ratio true PWM dimming can be achieved by driving DIM pin with a PWM signal. LED current is proportional to the DIM pin duty.
The AP80SY features extensive protection functions that include OLP, SLP, OCP, OVP and OTP. It is available in a SOP-10 package.
Applications
0 LCD TV LED Backlighting
0 LCD Monitor LED Backlighting
AP80SY
LED背光控制器
特性
07年27 v v的输入电压范围
0大功率电流模式DC / DC增加控制器
0100赫兹1 khz频率变暗原厂供应:线性IC,驱动IC,降压IC,供应大功率升压恒流芯片,恒流降压IC联系欧阳: QQ:
0内部5 v / 12 v电压调节器
0可编程的LED电流
0可编程斜率补偿
0的保护:
0开放领导保护(OLP)
0短了保护(SLP)
0切换电流保护((OCP)
0输出过压保护(OVP)
0)/温度保护(OTP)
0 sop-10包
0通过无铅认证
一般的描述
AP80SY领导司机当前模式,提高控制器。PWM的输入不仅驱动负载PWM开关,但也使NDRV转换和误差放大器操作。这个特性提供了极其快,真正的PWM开关负载。外部防渗墙检测电阻和斜坡补偿电阻使其灵活的各种应用程序。
一个ISEN销用于编程LED电流。高对比度真正的PWM调光可以通过驾驶暗销与PWM信号。LED电流正比于暗销的职责。
包括OLP的AP80SY特性广泛的保护功能,二,(OCP,OVP,OTP。它在SOP-10包是可用的。
应用程序
0液晶电视背光
0液晶显示器背光