型号：	KBQ-2TC
技术指标：	KBQ-2TC手提式电熔捆包机/电熔打包机/电熔捆扎机/手提式打包机/手工热熔打包机/手动热合打包机是以聚乙烯塑料带为捆扎材料、主要用于商业、邮政、铁路、银行、食品、医药、书刊、发行等行业的纸箱、木箱、纸包件、布包件的包装捆扎。在插入包装带后，机器收带、热合、切断都需人工完成。用于一些体积大的箱子进行打包。 电源:220V 50Hz 150W 捆紧力: 60KG 最小包装尺寸: 50x80mm 打包速度: ≤120次/时 外形尺寸:300x200x200mm PP带宽度:12-15mm 重量: 3kg Electrical source: 220V 50Hz 150W max contraction power: 60KG minimum packaging size: 50x80mm packaging rate: ≤120 times/hour outline size: 300x200x200mm the width of PP strap: 12-15mm weight: 3kg this machine takes advantage of the polythene plastic strap as the enlacing material,mainly applied in the packagingenlacing of cartons, wooden box, paper wrappage, fabric wrappage in industries such as business, post, railway, bank, food, medicine, booksperiodicals, publish,so on. After inserting the packaging strap, machine getting back the strap, thermal-bondcutting needs manual operation. Is suitable to package some case with large volume.
产品说明：	如果量大或是要效率高就选择凯比奇KBQ自动打包机/捆扎机/捆包机。 “凯比奇KBQ”牌自动打包机/捆扎机： 1、接头短,不用铁扣,符合国际环保要求(出口要求)又节约成本； 2、打包速度快,效率高,每打一道PP带仅需1.5秒； 3、速热系统,1V低电压,安全性好,瞬间加热,开机5秒钟后进入打包状态； 4、自动停机装置,省电实用.超过60秒不再操作时,马达会自动停机,进入待机状态； 5、电磁离合,快速平稳,连轴式传动,速度快、噪声小、磨损少、故障率低； 6、新型电路设计，采用插入式集成电路板控制整个打包动作和烫头温度，把电路部份分开，电路板维修检查方便； 7、新型电热钢片设计，寿命长、退热快，免除普通烫头之易变型和短路的缺点； 8、可使用6-15mm宽度之打包带，保证粘合效果完整一致； 9、设有快速调节旋钮，捆紧力大小可任意调节相当方便。 If the requirement is large quantityhigh efficiency, please choose the automatic packer/enlacing machine/bundling package machine. automatic packer/enlacing machine with ELIDA brand: 1、short interface, no metal button, meet the requirement of international environment protection； 2、fast packaging rate, high efficiency, 1.5 second per lane； 3、quick heat system, just need l V voltage, safety, heating instantly, getting into best packaging status after started； 4、automatic stop setting, save electricity practically. The motor will stop automatically if no operation after 60 seconds, the gets into ready status. 5、electromagnetism coupling , faststable, axis transmitting, high rate, less noiseabrasion, low failure rate; 6、new type circuit design, using inserting style integrated circuit board to control the whole packing operationiron head temperature, separating the circuit part,the maintenance of circuit board is conveniently； 7、new type electric-heat steel slice design, long life, fast heat fading, avoid the fault of shapelessshort circuit which general iron head usually caused； 8、may use the packing strap with 6-15mm width, ensure the adhesive efficiency consistently； 9、setting swift adjusting knob, can freely adjust the bundling power conveniently.