二手Q开关低价处理了,二手激光打标机低价甩卖了。浙江一网激光技术有限公司提供美国NEOS系列Q开关(声光Q头)半导体激光器维修、CO2激光器充气激光打标机维修……进口NEOS声光Q开关:
英国古奇系列Q开关(声光Q头):GOOCH&HOUSEGO系列Q开关(声光Q头) :I-QS027-3C4G-U5-ST1,法国AA系列Q开关(声光Q头):AA.QS27-A5-S1064-WSC
国产系列Q开关(声光Q头)
半导体激光器(半导体激光模块)吉泰系列GTPC-50D,GTPC-50S,GTPC-75S,GTPC-100;威睿晶科系列GDM-50D,GDM-50G,GDM-75 ;一品系列DPL-50S
Q switch maintenance
The acousto-optical Q-switch often used in the laser marking makes use of mutual interaction between an ultrasonic wave and a light beam in a scattering medium. The light beam that enters in a direction forming a Bragg angle to the wave surface of the acoustic wave in the scattering medium is diffracted in accordance with periodic changes in the diffraction rate produced by the acoustic wave.
The situation is briefly explained in Figure 1. First of all, an RF signal is impressed to the transducer adhered to the molten quartz and thickness extensional vibration is produced. Ultrasonic shear waves are caused to advance in the molten quartz by this vibration, and phase grating formed by acoustic waves is produced. The laser beam is diffracted when it satisfies the Bragg angle with respect to this phase grating, and is separated in space from the incident light.
Figure 1: Principle of A-O Q-switch
If the laser optical resonator is constructed against 0-dimensional diffracted light (undiffracted light), the diffracted light deviates from the laser optical resonator axis when a RF signal is impressed. As a result, loss occurs in the laser optical resonator and laser oscillation is suppressed. To make use of this phenomenon, an RF signal is impressed for a certain length of time only (status of low Q-value) to suspend laser oscillation. In the meantime, the population inversion of the Nd:YAG rod is accumulated by continuous pumping. When the RF signal is reduced to zero (status of high Q-value) and the loss to the laser optical resonator is removed, the accumulated energy is activated as laser oscillation in a pulse form within an extremely short length of time. They are Q-switch pulses.
This situation is briefly explained in Figure 2. When an RF signal is subjected to pulse modulation, it is possible to periodically take out a Q-switch pulse. When the period of Q-switch pulses becomes shorter than the life (about 200 ms) of the higher order of the Nd:YAG rod, however, the population inversion decreases and the peak value of Q-switch pulses decreases.
无锡一网激光设备有限公司
全国大客户经理:
无锡一网激光设备有限公司
地址:江苏省无锡市锡山经济技术开发区春雷路101号
销售热线:
24小时热线:
业务传真:
无锡一网激光设备(杭州)有限公司
地址:浙江杭州市富阳迎宾北路205号
联系电话:
移动电话:
业务传真: