DOPPEL-LAG-602 有机硅流平剂
Silicone surface additive for solvent-borne coating systems with a medium reduction of surface tension and a medium increase of surface slip.
Product Data
Composition
Solution of a polyether-modified polydimethylsiloxane.
Typical Properties
The values indicated in this data sheet describe typical properties and do not constitute specification limits.
Density (20 °C): 0.94 g/ml
Non-volatile matter (30 min., 150 °C): 52 %
Solvents: Xylene/Isobutanol
Flash point: 25 °C
Applications
Coatings Industry
Special Features and Benefits
The additive provides a medium reduction of surface tension in the coating systems. It increases slip and improves leveling and gloss. Silicone additives prevent the formation of Bénard cells.also improves substrate wetting and anti-blocking properties
Recommended Use
LAG 602 is broadly compatible and suitable for all solvent-borne systems.
Recommended Levels
0.1-0.3 % additive (as supplied) based upon total formulation
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
The additive can be incorporated during any stage of the production process, including post-addition.
Thinning before incorporation may make dosing easier
Special Note
Unlike so-called silicone oils, this additive is very user-friendly. However, before use, one should determine in test series whether foam is stabilized in certain systems and check the recoatability and crater development