联系人： 田正兴
联系电话：
公司座机：
****************************
：
工作QQ：
公司地址：青岛城阳区金岭工业园锦宏西路与路博路交接口
青岛路博组装4160-2型甲醛分析仪
产品介绍：
型甲醛分析仪采用美国进口INTEASCAN高灵敏甲醛电化学传感器和中央处理器组成，其灵敏度大于扩散性传感器的20-200倍，对于检测室内环境中低浓度甲醛气体非常敏感，它可以检测室内空气非常低的挥发性游漓甲醛。
甲醛分析仪采用3800mA大容量锂离子可充电电池，操作方便，可广泛用于室内环境检测，室内环境治理，环保装饰装修，化工场所，科研教学中甲醛检测专用设备。
特点：
1、标准的ppm显示单位
2、在污染环境中也可以进行回零
3、电化学传感器长寿命、高灵敏、无需注水维护
4、B-TEST可以检测提醒传感器的使用寿命
5、独特的二电极传感器设计，无需独立电池供电
6、采用DC8.4V，3800mA大容量锂离子可充电电池
7、采用美国进口INTEASCAN传感器和中央处理器，国内组装，方便维修
8、完全可以替代美国4160-2型甲醛分析仪
9、已获批外观专利证书
技术参数：
检测原理：进口电化学传感器
检测方式：泵吸式
显示方式：直读数码液晶显示
检测范围：0.00-19.99ppm（高精度建议不超过5ppm)
分 辨 率： 0.01ppm
响应时间： 10S
零点漂移：±1%FS
电 源 ： DC8.4V ，3800mA
外形尺寸：178 x 102 x 225 mm
标准配置：
主机1台、便携背包1个、背带1个、C-12过滤器1个、连接软管1个、采样手柄1个、充电器1个、工具1个、铝制箱1个、说明书1本、合格证1个。
联系人：田正兴
联系电话：
公司座机：
邮箱地址：lb041015@loobo.cn
欢迎新老客户咨询订购，给我一份信任，还您十分满意！
Contact: Tian Zhengxing
Tel:
Telephone:
Qingdao road Bo assembled 4160-2 formaldehyde analyzer
Product introduction:
formaldehyde analyzer using imported INTEASCAN high sensitive formaldehyde electrochemical sensor and a central processing unit, its sensitivity is more than 20-200 times the diffusion of sensor, detection of indoor environment is very sensitive to low concentration of formaldehyde gas, it can travel Lijiang volatile determination of formaldehyde in indoor air is very low.
formaldehyde analyzer using 3800mA large capacity lithium ion rechargeable battery, convenient operation, can be widely used for the detection of the indoor environment, indoor environmental governance, environmental protection decoration, chemical sites, special equipment for scientific research and teaching in the detection of formaldehyde.
Characteristic：
1, the standard ppm display unit
2, in the polluted environment can also be zero
3, electrochemical sensor long life, high sensitivity, no water injection maintenance
4, B-TEST can detect the service life of the reminder
5, the unique design of the two electrode sensor, without independent battery power supply
6, using DC8.4V, 3800mA large capacity lithium ion rechargeable battery
7, the United States imported INTEASCAN sensors and the central processor, the domestic assembly, easy maintenance
8, completely replace the United States 4160-2 formaldehyde analyzer
9, has approved the appearance of a patent certificate
Technical parameters:
Detection principle: imported electrochemical sensor
Test method: pump suction
Display mode: direct digital LCD display
Detection range: 0.00-19.99ppm (high precision recommended no more than 5ppm)
Rate: points on 0.01ppm
Response time: 10S
Zero drift: + 1%FS
Electric source: DC8.4V, 3800mA
Dimensions: 178 x 102 x 225 mm
Standard configuration:
The 1 computers, portable backpack 1 straps, 1, 1 C-12 filters and the connecting hose 1, handle 1, sampling charger 1, 1 aluminum, tool box 1, 1, the manual certificate 1.
Contact: Tian Zhengxing
Tel:
Telephone:
Email address: lb041015@loobo.cn
Welcome new and old customers to order, give me a trust, you are also very satisfied!