外柔而内益刚。—— 唐·柳宗元《答周君巢书》
DSE5G-A60/31N-E1K11B迪普马比例方向阀
迪普马 液压阀 比例阀 Duplomatic 方向控制阀 比例方向阀 比例换向阀
DSE5G-A60/31N-E1K11B DSE5G-A60/31N-E1K11B DSE5G-A60/31N-E1K11B
DSE5G-A60/31N-E1K11B DSE5G-A60/31N-E1K11B DSE5G-A60/31N-E1K11B
Duplomatic Hydraulic Valves
迪普马液压阀
比例阀 比例方向控制阀
DSE5G 比例方向阀，带集成放大板 ISO 4401-0 (CETOP 05)
DSE5G DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL AND INTEGRATED ELECTRONICS
SERIES 31
SUBPLATE MOUNTING
ISO
p max 320 bar
Q max 90 l/min
MOUNTING SURFACE
ISO (CETOP 4.)
OPERATING PRINCIPLE
- The DSE5G is a direct operated directional valve with integrated electric proportional control and mounting interface in compliance with ISO 4401 standards.
- It is used for control the positioning and the speed of hydraulic actuators.
- The valves are available with command signal in voltage or current, and on-board electronics with internal enable, external enable or 0V monitor on pin C.
- A solenoid current monitoring signal is available.
- The valve is easy to install. The driver directly manages digital settings. In the event of special applications, you can customize the settings using the optional kit (see par. 11.3)
PERFORMANCES
(obtained with mineral oil with viscosity of 36 cSt at 50°C and p = 140 bar)
Maximum operating pressure
P - A - B ports：320 bar
T port：140 bar
Maximum flow with ∆p 10 bar P-T：30 - 60 l/min
Response times：see paragraph 7
Hysteresis：< 3% of Q max
Repeatability：< ±1% of Q max
Electrical characteristics：see paragraph 3
Ambient temperature range：-20 / +60 °C
Fluid temperature range：-20 / +80 °C
Fluid viscosity range：10 ÷ 400 cSt
Fluid contamination degree：According to ISO 4406:1999 class
Recommended viscosity：25 cSt
Mass
single solenoid valve：5.1 kg
double solenoid valve：6.6 kg
迪普马 液压阀 比例阀 Duplomatic 方向控制阀 比例方向阀 比例换向阀
DSE5G-A60/31N-E1K11B DSE5G-A60/31N-E1K11B DSE5G-A60/31N-E1K11B
DSE5G-A60/31N-E1K11B DSE5G-A60/31N-E1K11B DSE5G-A60/31N-E1K11B
供应商信息：上海心雨机电设备有限公司
Attn：闫菲
Tel：
Fax：
Q扣扣Q：
处治世宜方，处乱世宜圆。—— 明·洪自诚《菜根谭》
DSE5G-A60/31N-E1K11B迪普马比例方向阀
迪普马 液压阀 比例阀 Duplomatic 比例方向控制阀 比例方向阀 比例换向阀 阀门
Duplomatic Hydraulic Valves
迪普马液压阀
比例阀 比例方向控制阀
DSE5G DIRECTIONAL VALVE
WITH PROPORTIONAL CONTROL AND INTEGRATED ELECTRONICS
SERIES 31
DSE5G 比例方向阀，带集成放大板
ISO 4401-0 (CETOP 05)
Pmax = 320 bar
Qmax = 90 l/min
技术参数
zui大工作压力：
油口 P - A - B：320 bar
油口 T：140 bar
zui大流量∆p10 bar P-T：30 - 60 l/min
响应时间：见第7节
磁滞：< 0,3%
重复精度：< ±1%
电气特性：见第3节
环境温度范围：-20 / +60 °C
油液温度范围：-20 / +80 °C
油液粘度范围：10 - 400 cSt
油液允许的zui高污染度：根据ISO 4406:1999 等级
油液粘度：25 cSt
质量：
单电磁铁阀：5.1 kg
双电磁铁阀：6.6 kg
Duplomatic Hydraulic Valves
迪普马液压阀
比例阀 比例方向控制阀
DSE5G 比例方向阀，带集成放大板
ISO 4401-0 (CETOP 05)
IDENTIFICATION CODE
"DSE5G-***/30*-*K11*"
"DS"--Direct operated directional control valve
"E"--Electric proportional control
"5"--Size ISO (CETOP 05)
"G"--Digital integrated electronics for open loop
"*"--Spool type:
C = closed centres
A = open centers
Z = with overlap jump
"*"--Nominal flow rate of the spool (see chart par. 2)
"*"--Solenoid position (omit for 2 solenoids configuration):
SA = 1 solenoid on side A
"30"--Series No.(the overall and mounting dimensions remain unchanged from 30 to 39)
"*"--Seals:
N = NBR seals for mineral oil (standard)
V = FPM seals for special fluids
"*"--Reference signal:
E0 = voltage ±10 V
E1 = current 4 - 20 mA
"K11"--Main connector 6 pin + PE
"*"--Pin C function:
A = external enable
B = internal enable
C = 0V monitor
Duplomatic Hydraulic Valves
迪普马液压阀
比例阀 比例方向控制阀
DSE5G 比例方向阀，带集成放大板
ISO 4401-0 (CETOP 05)
型号列举
DSE5G-C30/30N-E0K11B
DSE5G-C60/30N-E0K11B
DSE5G-A30/30N-E0K11B
DSE5G-A60/30N-E0K11B
DSE5G-Z30/30N-E0K11B
DSE5G-Z60/30N-E0K11B
DSE5G-C30SA/30N-E0K11B
DSE5G-C60SA/30N-E0K11B
DSE5G-A30SA/30N-E0K11B
DSE5G-A60SA/30N-E0K11B
DSE5G-C30/30N-E1K11B
DSE5G-A60/30N-E1K11B
DSE5G-C60/30N-E1K11B
DSE5G-C60SA/30N-E1K11C
DSE5G-A30SA/30N-E1K11C
DSE5G-A60SA/30N-E1K11C
DSE5G-Z30/30N-E0K11C
DSE5G-Z30/30N-E1K11C
DSE5G-Z60/30N-E0K11B
DSE5G-Z60/30N-E1K11B
……