-630A
工作原理
Working principle
低压断路器的主触点是靠手动操作或电动合闸的。主触点闭合后,自由脱扣机构将主触点锁在合闸位置上。过电流脱扣器的线圈和热脱扣器的热元件与主电路串联,欠电压脱扣器的线圈和电源并联。
The main contact of low voltage circuit breaker is operated by manual operation or electric closing. After the main contact is closed, the free tripping mechanism locks the main contact on the closing position. The coil of the over current release and the thermal element of the thermal release are connected with the main circuit, and the coil and the power supply of the undervoltage release are parallel.
当电路发生短路或严重过载时,过电流脱扣器的衔铁吸合,使自由脱扣机构动作,主触点断开主电路。
When the circuit is short circuited or seriously overloaded, the armature of the over current release is pulled to make the free tripping mechanism act, and the main contact disconnects the main circuit.
当电路过载时,热脱扣器的热元件发热使双金属片上弯曲,推动自由脱扣机构动作,主触点断开主电路。
When the circuit is overloaded, the heating element of the thermal release can bend the bimetallic strip to drive the free tripping mechanism, and the main contact disconnects the main circuit.
当电路欠电压时,欠电压脱扣器的衔铁释放,也使自由脱扣机构动作,主触点断开主电路。
When the circuit is under voltage, the release of the armature of the undervoltage release also makes the free tripping mechanism act, and the main contact disconnects the main circuit.
当按下分励脱扣按钮时,分励脱扣器衔铁吸合,使自由脱扣机构动作,主触点断开主电路。
When the split release button is pressed, the armature release of the split release lever moves the free tripping mechanism, and the main contact disconnects the main circuit.