ABB DPT-CB010系列双电源自动转换开关；DPT63-CB010 C16 3P
自动转换开关一般为有条件转换，例如：消防信号、断电、定时等。如果是断电条件
Automatic transfer switch is generally conditional transformation, such as fire signal, power failure, timing and so on. If it is a power off condition
它的作用主要是保证供电可靠性。对于二级以上的负荷，例如消防。要求两回路供电，意思是这个转换开关有两路电源进线，正常情况下有一路供电，当特殊情况
Its main function is to guarantee the reliability of power supply. For more than two levels of the load, such as fire. The two loop power supply is required, meaning that the switch has two power supply lines, and there is a power supply under normal circumstances.
（火灾）普通照明会因为报警而切断供电，这是转换开关会因为收到信号或断电 而自动把电源切换到另一路供电（这一路不至于同事断电 也可以是发电机组）
(fire) ordinary lighting will cut off the power supply because of the alarm, this is the switch switch will automatically switch the power to another power supply because of receiving the signal or power off (this way is not a coworker or a generator set).
我知道博耳电力有一站式高端综合配电系统和方案的设计、制造、销售及增值服务。公司拥有近30年的专业经验，其智能配电涵盖40KV以下的中低压配电配电柜、环网
I know that Boer power has a one-stop high-end integrated distribution system and design, manufacturing, sales and value-added services. The company has nearly 30 years of professional experience, its smart distribution covers less than 40KV of the middle and low voltage distribution, distribution cabinets, ring network.
柜、箱变、电容补偿柜等成套解决方案。
Cabinet, box change, capacitor compensation cabinet and other complete solutions.
使用范围：广泛应用于电厂、商业建筑、购物场所、主供电站、配电站、变电所、工业、轻工业、住宅等行业。
Application: widely used in power plants, commercial buildings, shopping places, main power stations, distribution stations, substations, industry, light industry, housing and other industries.