Polyacrylamide PAM applied to common sewage treatment
Henan net is committed to creating quality service industry chain, to provide quality services for the vast number of consumers.
Contact mode: Manager Cao
The level of social life is improving constantly, the industrialization process is more and more quickly, there is more and more serious damage to the environment, the pollution of industrial wastewater in recent years, the community was broke the water pollution problem battered. At present, the domestic water pollution problem is becoming more and more important, and the non water treatment of the enterprise can not be discharged. Therefore, polyacrylamide and polyaluminum chloride are also widely used in the field of water treatment. Today, the main application of Polyacrylamide in water treatment is analyzed by an Jia Jing.般都这样认为：无论何种溶液，温度越高，溶解速度越快，但是，用这种认知套用在使用聚丙烯酰胺上面就是错误的了，因为聚丙烯酰胺的溶解速度只有在30-60摄氏度时是正常的，低于30度或者高于60度都会导致聚丙烯酰胺溶解速度减缓，絮凝效果变差。
聚丙烯酰胺的溶解速度受浓度的影响，这和我们一般常识是一样的原理：浓度越小，溶解速度越快。聚丙烯酰胺的浓度一般配置成0.3%最为合适。
搅拌速度也是影响溶解产品溶解速度的因素之一，可能大家已经有所了解，无论哪种溶液都是搅拌速度越快，溶解速度越高。但是我们并不赞成用提高搅拌速度的办法快速溶解聚丙烯酰胺，因为搅拌的越快，冲击力就越大，冲击力剪断聚丙烯酰胺的分子链，影响聚丙烯酰胺的吸附沉淀效果。
生产聚丙烯酰胺20年，经验丰富，产品型号齐全，可处理各种污水，如有需求可以随时联系的技术人员。
Now the sewage treatment market is more chaotic, and for customers, when choosing products, more than the price. But this net commitment to you, our products are of good quality, price concessions, service is also in place, you can come to understand. For anionic polyacrylamide products, one of the main properties of distinguishing products is the size of molecular weight. Meanwhile, another index, we s
The concept of industrial waste water is very extensive. Almost all industrial wastewater can be called industrial wastewater, such as brewery wastewater, pharmaceutical factory sewage and so on. According to the different types of sewage treatment process, the choice is not the same, with the wastewater pH and different content of the suspended substance, the sewage treatment agent is also different, so need to according to the analysis of the specific water chemical specifications, test and determine the type and dosage etc.. But the application of Polyacrylamide in water treatment is relatively few. For example as follows:
Polyacrylamide is mainly used as flocculant to treat industrial waste water. The molecular chain contains a certain amount of solid particles, which makes the particles form large flocculants. It can accelerate the sedimentation of particles in suspension, and has obvious effect of speeding up clarification, promotion and filtration. It is widely used