ABB 剩余电流动作断路器；GSH203 AC-C32/0.03
结构特性
Structural characteristics
断路器的结构
The structure of a circuit breaker
断路器的结构是由钢板制成，可使断路器尺寸减少并显得精巧，采用双层绝缘隔离带电体，增强其安全性，而且相与相之间
The structure of the circuit breaker is made of steel plate, which can reduce the size of the circuit breaker and appear exquisite. The double layer insulation is used to isolate the charged body to enhance its safety and between phase and phase.
是完全分隔的。
It's completely separated.
Emax X1 断路器尺寸紧凑，可极大地减少外形尺寸，而且可水平或垂直安装。由于 X1 宽度很小，如果采用水平安装，开关
Emax X1 circuit breaker is compact in size, which can greatly reduce the size of the form, and it can be installed horizontally or vertically. Because the X1 width is very small, if the horizontal installation is used, the switch will be used.
柜中断路器的数量可大大增加。
The number of circuit breakers in the cabinet can be greatly increased.
Emax E1- E6 断路器具有同高度及同深度的特性，抽出式适合安装在深度 500 mm 的配电盘中。宽度 324 mm (额定电流高达
The Emax E1- E6 circuit breaker has the same height and the same depth characteristic. The extractable type is suitable for installation in the distribution disc with a depth of 500 mm. The width is 324 mm (the rated current is up to high)
2000 A) 抽出式断路器可安装在隔间宽 400 mm 的配电盘中。这些精巧的尺寸亦可替换早期的空气断路器。
2000 A) the extractable circuit breaker can be installed in the distribution panel with a width of 400 mm. These delicate sizes can also replace early air circuit breakers.