GFD 光伏支架水泥墩模具 常规尺寸 保定聚兴水泥制品厂生产的光伏墩是由光伏墩模具制作，光伏支架水泥墩模具 应用到电力，交通，通讯等工程上预制u型螺栓，光伏支架水泥墩模具 主要是根据你的光伏支架承重要求、还有当地的气象数据（如风力、雨雪等）情况下是否会让支架系统依旧牢固。光伏墩是利用彩钢瓦铁皮来制作柱形混凝土基础，光伏支架水泥墩模具 制作的基础直径300mm，高300mm。成本4。5元左右，重量40KG左右，且光伏墩模具可重复利用。光伏支架水泥墩模具 优点：相比较波纹管，裁切的工序可以工厂完成，节省了切割的工时；光伏支架水泥墩模具 重量轻体积小，运输方便；塑料模具材质相比较不易沾水泥The pv pier produced by baoding juxing cement products factory is made of pv pier molds, and the pv bracket cement pier molds are applied to power, transportation, communication and other projects pre-fabricated u-bolt, cement pier mold of photovoltaic bracket is mainly based on the requirements of your photovoltaic bracket load bearing, as well as local meteorological data (such as wind, rain and snow, etc.), whether the bracket system will still be strong. Photovoltaic piers are column-shaped concrete foundations made of cang-steel tile iron sheets. The foundation diameter and height of the foundation made of cement piers for photovoltaic brackets are 300mm and 300mm respectively. The cost of 4. About 5 yuan, the weight is about 40KG, and the photovoltaic pier mold can be reused. Advantages: compared with bellows, cutting process can be completed in the factory, saving cutting time; Photovoltaic support cement pier mold light weight small volume, convenient transportation; Plastic mold material is not easy to get cement