（中英版本可选）
北京防威智能消防主机，壁挂式火灾报警主机，总线型消防报警主机
JB-QB-FW6000型火灾报警控制器
主要技术指标
电源：交流电源(主电源)：额定工作电压 ～220VV）
使用环境：温 度：0℃～+42℃
相对湿度：≤95%，不凝露
容 量：壁挂型、回路数: 1个回路 回路地址的用量：242点
外形尺寸：(长*宽*高mm
显示器：LCD液晶屏
重 量：12kg
布线要求:探测总线线制：采用双绞线，参考型号RVS2×1.0㎜2或RVS2×1.5㎜2，
安装要求
壁挂安装，其底边距离地面的高度为1.3-1.5m，靠近其门轴的侧面距墙不能小于0.5m，正面操作距离不小于1.2m。
英文说明：
General Description
FW6000 Intelligent Fire Alarm Control Panel (FACP) is the new-generation fire alarm control unit designed by our company for applications in small and medium projects. It is wall-mounted type and has the advantages of powerful function, high reliability and flexible configuration. The panel is equipped with a LCD monitor to display all the information on fire alarms, faults and various operations, which can be printed out by the built-in printer. FW6000 is a oneloop control panel with maximum 240 points, which can work together with all FW 3 series field devices.
Features:
Powerful Function and High Reliability This FACP uses two-wire bus system to control up to 240 addressable devices Wall mount design makes it easy to use and operate.
The FACP is composed of a main control module, a driver board and a communication board
This FACP is compatible with the complete range of the FW series fire alarm devices like intelligent detectors, manual call point, input module, I/O module, etc.
This FACP also has the function of dust contamination warning to make sure the detectors work properly and effectively. This FACP adopts windows-based operational menus, which are convenient and easily
understood. All the system functions can be realized just by simple operation to select the corresponding
numbers or move the cursor. The fire alarm sent out by this FACP is not only visible & audible, it can also be displayed on the LCD screen and be printed out by the built-in printer simultaneously, meanwhile,
it can be recorded in the history log as well
