双路加强型 CoaXPress 图像采集卡
特性一览
用于工业和运输嵌入式应用的加强型板卡
小型可堆叠的 PCIe/104 结构
扩展温度范围：-40 到 +85°C / -40 到 +185°F
持续的冲击：40 克/11 毫秒（所有轴 - 半正弦和锯齿波）
可选的保形涂层
2 路CoaXPress CXP-6 连接：1,250 MB/s 相机带宽
PCIe 2.0 (Gen 2) x4 总线：传输带宽 1,700 MB/s
Mechanical
Form Factor PCIe/104 card
Format 4-lane PCIe/104, stack-down only, universal peripheral module
Cooling method Conduction cooling
Mounting For stacking down directly under the Host PC:
1 or 2 modules on Type 1 and Type 2 Host PC's
Connectors
'CAMERA POWER INPUT'
4-pin 0.1-in Molex KK 7478 male connector
'C2C-Link'
6-pin 2-row 0.1-in header
onHD26F I/O module for Coaxlink Duo PCIeptional)
26-pin 3-row high-density female sub-D connector
GPIO lines and power output
'AB' onDINCoaxial cable for Coaxlink Duo PCIeptional)
DINfemale connectors
CoaXPress host interface
Lamp indicators
'AB' onHD26F I/O module for Coaxlink Duo PCIeptional)
2x bi-color red/green LEDs
CoaXPress Host connector indicator lamps
'FPGA STATUS LAMP' onHD26F I/O module for Coaxlink Duo PCIeptional)
Bi-color red/green LED
'BOARD STATUS LAMP' onHD26F I/O module for Coaxlink Duo PCIeptional)
Bi-color red/green LED
Switches 'RECOVERY' on card PCB:
3-pin 1-row 0.1" header
Firmware emergency recovery
Dimensions 96 mm x 90 mmn xn
Weight 75 gz without accessories
Host bus
Standard PCI Express 2.0
Link width
4 lanes
1 lane or 2 lanes with reduced performance
Link speed
5.0 GT/s (PCIe 2.0)
2.5 GT/s (PCIe 1.0) with reduced performance
Maximum payload size 512 bytes
DMA 32- and 64-bit
Peak delivery bandwidth 2,000 MB/s
Effective (sustained) delivery bandwidth 1,700 MB/s (Host PC motherboard dependent)
Power consumption Typ. 8.4 W +12V excluding I/O power output
+3.3V and +5.0V rails are not used