用于单个基本配置 Camera Link 相机的图像采集卡
特性一览
连接1路Camera Link Base 或Lite 配置相机
直接兼容市场上数以百计的 Camera Link 相机
支持 PoCL，通过 Camera Link 供电
ECCO：延长的 Camera Link 线缆长度
PCIe x1 总线：200 MB/s 持续传输带宽
特征丰富的 10 条数字 I/O 线
Memento 事件日志工具
Mechanical
Form Factor PCI Express card
Format Low profile, half length, 1-lane PCI Express card
Cooling method Air-cooling, passive heatsink
Mounting For insertion in a low-profile or standard height, 1-lane or higher, PCI Express card slot
Connectors
'A' on bracket:
26-position Shrunk Delta Ribbon (SDR) socket
Camera Link Base connector
'EXTERNALn standard bracket:
25-pin 2-row female sub-D connector
I/O lines and power output
'INTERNALn PCB:
26-pin 2-row 0.1" pitch pin header with shrouding
I/O lines and power output
'POWER INPUT' on module:
4-pin MOLEX power socket
12 VDC power input for PoCL camera and I/O power
Dimensions Lmm x H 68.90 mm L 6.6 in x H 2.71 in
Weight 98 gz
Host bus
Standard PCI Express 1.0
Link width 1 lane
Link speed 2.5 GT/s (PCIe 1.0)
Maximum payload size 1024 bytes
DMA 32- and 64-bit
Peak delivery bandwidth 256 MB/s
Effective (sustained) delivery bandwidth
Up to 200 MB/s for a PCI Express payload size of 256 bytes
Up to 180 MB/s for a PCI Express payload size of 128 bytes
Power consumption Max. 4.5 W; Typ. 3.8 W (0.34 A 3.3V;0.22 A +12V)
Camera / video inputs
Interface standard(s) Camera Link 2.0
ECCO - Extended Camera Link Cable Operation ECCO
Number of cameras One Base or Lite camera
Line-scan cameras supported Yes
Maximum aggregated camera data transfer rate 2.04 Gbit/s (255 MB/s)
Camera Link configuration Base or Lite
Camera Link clock frequency From 20 MHz up to 85 MHz
PoCL (Power over Camera Link) One PoCL SafePower compliant controller with overload, over-voltage and short-circuit protections
Camera types
Gray-scale and color (RGB and Bayer) cameras
Area-scan and line-scan cameras
Area-scan camera control
Trigger
Precise control of asynchronous reset cameras, with exposure control.
Support of camera exposure/readout overlap.
Support of external hardware trigger, with optional delay and trigger decimation.
Strobe
Accurate control of the strobe position for strobed light sources.
Support of early and late strobe pulses.
Line-scan camera control
Scan/page trigger
Precise control of start-of-scan and end-of-scan triggers.
Support of external hardware trigger, with optional delay.
Support of infinite acquisition, without missing line, for web inspection applications.
Line trigger
Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
Rate Converter tool for fine control of the pixel aspect ratio.
Rate Divider tool
Line strobe
Accurate control of the strobe position for strobed light sources.
On-board processing
On-board memory 64 MB (32 MB for image data)
Image data stream processing
Unpacking ofbit to 16-bit with selectable justification to LSb or MSb
Input LUT (Lookup Table)
Monochrome: 8-bit, 10-bit or 12-bit per pixel, up to 500 MPixel/s
RGB: 3x8-bit per pixel, up to 125 MPixel/s
Bayer CFA to RGB decoder
Advanced interpolation method using average and median functions on a 3x3 kernel
Up to 125 MPixel/s