用于单个基本配置 PoCL Camera Link 相机的图像采集卡
特性一览
对于 Camera Link Base 配置相机
直接兼容市场上数以百计的 Camera Link 相机
支持 PoCL，通过 Camera Link 供电
PCIe x1 总线
32 MB 板载内存
特征丰富的 9 条数字 I/O 线
Mechanical
Form Factor PCI Express card
Format Standard profile, half length, 1-lane PCI Express card
Cooling method Air-cooling
Mounting For insertion in a standard height, 1-lane or higher, PCI Express card slot
Connectors
'CAMERA LINK' on bracket:
26-position Mini Delta Ribbon (MDR) socket
Camera Link connector
'SYSTEM' on bracket:
26-pin 3-row high-density male sub-D connector
I/O lines and power output
'SYSTEM' on PCB:
26-pin 2-row 0.1" pitch pin header with shrouding
I/O lines and power output
'CAMERA POWER INPUT' on module:
4-pin MOLEX power socket
12 VDC power input for PoCL camera
Dimensions L 168 mm x H 111 mm L 6.61 in x 4.37 in
Host bus
Standard PCI Express 1.0
Link width 1 lane
Link speed 2.5 GT/s (PCIe 1.0)
DMA 32-bit
Peak delivery bandwidth 256 MB/s
Effective (sustained) delivery bandwidth 180 MB/s (Host PC motherboard dependent)
Power consumption Max. 5.35 W (500 mA +3.3V, 300 mA +12V), excluding I/O power output
Camera / video inputs
Interface standard(s) Camera Link
Connectors 1 Mini Delta Ribbon (MDR) Camera Link (CL)
Number of cameras One Base camera
Line-scan cameras supported Yes
Maximum aggregated camera data transfer rate 2.04 Gbit/s (255 MB/s)
Camera Link configuration Base
Camera Link clock frequency From 20 MHz up to 85 MHz
PoCL (Power over Camera Link) One PoCL SafePower compliant controller with overload, over-voltage and short-circuit protections
Camera types
Gray-scale and color (RGB and Bayer) cameras
Area-scan and line-scan cameras