多线系统设备 出口品质
General Description
The bell remains the most commonly used alarm for fire evacuation system, for wall applications, indoors.
They are designed to be used in 24 volt DC systems.
Specifications
Voltage ranges: 20vdc to 28vdc (Nonpolarity)
Power and current consumption: 1W, 38ma24vdc(maximum)
Number of standard: EN54-3
Sound level：80dB（A）1M (minimum)
Service Use: Fire alarm, general signaling, burglar alarm
Environment type: Type A (indoor)
Input terminal Wire Gauge: 0.28 mm2 to 1.5 mm2
Operating Temp.: -10℃ to +55℃
Operating Humidity Range: 10% to 93% Relative Humidity ( Non-condensing)
Material of cover: Aluminum
Dimension: 150mm×50mm（D*H) (Without bracket)
Weight: Net Weight 342g, Gross Weight 395g
Wiring
The system designer must make sure that the total current drawn by the devices on the loop does not exceed the
current capability of the panel supply, and that the last device on the circuit is operated within its rated voltage.
When calculating the voltage available to the last device, it is necessary to consider the voltage drop due to the
resistance of the wire. The thicker the wire, the smaller the voltage drops. Wire resistance tables can be obtained from
electrical handbooks.