原装美国进口C-FLEX磨床轴承
进口轴承，
C-FLEX轴承，cflex轴承，BD-10 20 30轴承，进口磨床轴承。
挠性轴承，十字轴承，弯曲轴承，角度轴承，柔性铰链 C-Flex pivot bearing,Single end bearing
由于数量多少，价格相差很大
单位（Inch,Lb,Lb-In/Degree)
示例：
HD-10中间弹片厚度0 007in=0 173mm
HD-20中间弹片厚度0 014in=0 345mm
HD-30中间弹片厚度0 027in=0 691mm
Product Codes:All the Single End Bearings from C-flex company
|
Dia |
1/8 |
5/32 |
3/16 |
1/4 |
5/16 |
3/8 |
1/2 |
5/8 |
3/4 |
1 |
|
10系列 |
AD-10 |
BD-10 |
CD-10 |
DD-10 |
ED-10 |
FD-10 |
GD-10 |
HD-10 |
ID-10 |
JD-10 |
|
20系列 |
AD-20 |
BD-20 |
CD-20 |
DD-20 |
ED-20 |
FD-20 |
GD-20 |
HD-20 |
ID-20 |
JD-20 |
|
30系列 |
AD-30 |
BD-30 |
CD-30 |
DD-30 |
ED-30 |
FD-30 |
GD-30 |
HD-30 |
ID-30 |
JD-30 |
|
(1) Torsional Spring rates: Lb-In/Degree rates of standard C-Flex bearings generally fall within +/-10% of these values at zero load Contact C-Flex if specific spring rates or closer tolerances are required |
|
(2) Load Capacity: Lt or Lc (Pounds load in tension or compression) These values are maximum loading (weight or static force) at zero deflection Load requirements, angular deflection and cyclic life must be considered when sizing bearings Lc is pure radial load creating compressive stresses in the spring, while Lt is a pure radial load creating tensile stresses |
1Lb-In/Degree=6 474 Nm/rad