SEW EURODR-510997
驱动逆变适用于工业和商业系统，用于交流异步电动机或永久磁场交流同步电动机的运行，这些电机必须适合与支频器一起样作其他负载不能连接到机组上，movidrive MD 60A驱动送变器是用于固定安装在开关柜中的单元。必须遵守技术资料上的说明和机组运行的许可条件。在确定机器符合EMC指今89/336/EEC并目最终产品的符合性已根据MachinervDirective 89/392/EEC(参考EN 60204)确定之前，不要启动
设备(以的方式运行)。
除非采取明确措施，禁止下列用途
在防爆区域使用
在暴露于有害油，酸，气体，蒸汽，灰尘，辐射等的区域中使用。在非固定应用中使用，这些应用会受到超过EN 50178要求的机城振动和冲击载荷MOVIDRIVE MD 60A变频器必须执行任何安全功能，没有更高级别的系统。为了确保人员和系统的安全，必须建立更高层次的安全防范体系外置必须按照材料结构和现行法规进行，例如:电子废料(印刷电路板)塑料(住房)金板铜等
Drive inverter is suitable for industrial and commercial systems, used for the operation of AC asynchronous motors or permanent field AC synchronous motors. These motors must be suitable for working with frequency converters and other loads cannot be connected to the unit. The movidrive MD 60A drive transformer is used for fixed installation of units in the switchgear. The instructions on the technical documentation and the licensing conditions for unit operation must be followed. Do not start until the compliance of the machine with EMC Directive 89/336/EEC and the final product has been determined in accordance with MachinervDirective 89/392/EEC (refer to EN 60204)
Equipment (running in a specified manner).
Unless clear measures are taken, the following uses are prohibited
Used in explosion-proof areas
Use in areas exposed to harmful oils, acids, gases, vapors, dust, radiation, etc. When used in non fixed applications, these applications will be subjected to machine vibration and shock loads exceeding the requirements of EN 50178. The MOVIDRIVE MD 60A frequency converter must perform any safety functions, and there is no higher level of safety prevention system. In order to ensure the safety of personnel and systems, a higher level of security prevention system must be established. The external components must be carried out in accordance with the material structure and current regulations, such as electronic waste (printed circuit boards), plastic (housing)Gold platecopperetc.
