Description
Salwico UV test lamp is used to perform function test on Salwico UV flame detectors.
Salwico UV test lamp is delivered complete with rechargeable batteries and a battery charger.
Detector test
Before a test is carried out make sure the flame detector is switched on and the alarm outputs are in override.
Switch on the test lamp. Point at the UV detector within range until the detector indicates alarm with the red LED. Most flame detectors will respond within 30 seconds.
Charging
The battery is already charged when leaving the factory. However, the unit should always be charged after purchase. See instruction on the back of the charger.
Data
Ingress protection IP20
Temperature range -15°C to +40°C
Material Plastic
Weight ~2000 g
Test range Up to 15 meters
Battery charger VAC (Lead Acid battery charger, max 1,3A)
Battery type 6V 4,5A
Dimension 300x140x180 mm
Lamp H3, VDC, 35W
Operation time 2 hours under normal condition up to 15 meters.
Specifications
CONSILIUM SALWICO 紫外线火焰探测器NS-AUV
型号：NS-AUV
SALWICO NS-AUV(PART NO.N11121)
电压：DC 24V
使用温度范围：-25℃~+70℃
安装方式：露出
质量：120g
Detector Adapter SPB-1
中间接线座
Detector Base 2IP55
防水底座
感烟感温探头NS-AOHS PN: 要5套，带底座
火焰探头NS-AUS PN: 也是5套，带底座
康士廉
CONSILIUM烟感探测器NS-AUV
CONSILIUM烟感感应器N11121
CONSILIUM烟感探测器N11121
康士廉烟感探头NS-AUV