PPS W331 美国通用电气公司
特性：耐磨
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 基本性能 | 吸水率 | --- | --- | 0.01 | % |
| 物理性能 | 比重 | --- | --- | 1.65 | --- |
| 模具收缩率 | --- | --- | 4-6 | E-3 | |
| 增强 | --- | --- | 30 | --- | |
| 体积电阻 | --- | --- | 8.0E+16 | Ohm-cm | |
| 表面电阻 | --- | --- | 1.0E+13 | Ohm-cm | |
| 机械性能 | 冲击强度 | 缺口23℃ | --- | 85 | J/m |
| 热变形温度 | 1.8Mpa | --- | 250 | ℃ | |
| 拉伸强度(断裂点) | --- | --- | 141 | % | |
| 拉伸率(断裂点) | --- | --- | 2 | % | |
| 拉伸模量 | --- | --- | 9233 | --- | |
| 弯曲模量 | --- | --- | 10335 | Mpa | |
| 电气性能 | 阻燃性 | --- | --- | V-0 | --- |
| 阻燃性 | --- | --- | 1.5 | mm | |
| 阻燃性 | --- | --- | 0.9 | mm | |
| 阻燃性 | --- | --- | 5V | --- | |
| 热 性 能 | 线膨胀系数 | --- | --- | 1.6E-05 | 1/℃ |
