UBA-9290(2.9GHz)  RF Field Strength Analyzer Specifications Specifications Frequency Range 100㎑ to 2900㎒(2.9GHz) // 100㎑ to 2100㎒(2.1GHz) Accuracy TCXO : ±2.5PPM Reception Sensitivity Approx. 0 - 6 dBu EMF (S/N : 10dB at W-FM, 12dB at N-FM) Step Range Multiples of 5㎑ & 6.25kHz Span Range 1MHz to Max.1000MHz (1,2,5 Step / at 200CH) Amplitude(Level) N-FM Range -32dBm to -117dBm for 1MHz to 2900MHz (UBA-9290) -67dBm to -117dBm for 1MHz to 2100MHz (UBA-9210) Resolution ±0.1dB Accuracy ±2.0dB(at an ambient of temperature of (23℃±3℃: UBA-9290) ±2.5dB(at an ambient of temperature of (23℃±3℃: UBA-9210) Repeatability ±2dB Bandwidth N-FM: Apprx 12.5㎑(-6dB) W-FM/AM/SSB Range -22dBm to -107dBm for 10MHz to 2900MHz (UBA-9290) -57dBm to -107dBm for 1MHz to 2100MHz (UBA-9210) Resolution ±0.1dB Accuracy ±2.0dB(at an ambient of temperature of (23℃±3℃: UBA-9290) ±2.5dB(at an ambient of temperature of (23℃±3℃: UBA-9210) Repeatability ±2dB Bandwidth W-FM: Apprx 180㎑(-6dB), AM/SSB: Appex 2.4㎑(-6dB) Spurious and Noise Level Internally Generated : -35dBc W-FM : -45dBc for N-FM Typical, Below a Full Scale Signal Level Frequency. Input Impedance 50Ω (Standard) Max. Input Voltage Max. 5V RMS Level Units dBm, dBmV, dBuV Reference(Internal Atten. Max 35dB : Only UBA-9290) -22dBm(W-FM/AM/SSB : 35dB), -32dBm(N-FM : 35dB) -27dBm(W-FM/AM/SSB : 30dB), -37dBm(N-FM : 30dB) -37dBm(W-FM/AM/SSB : 20dB), -47dBm(N-FM : 20dB) -47dBm(W-FM/AM/SSB : 10dB), -57dBm(N-FM : 10dB) Functions Display Modes Spectrum Display Multi Bar Graph Display (5, 10, 20, 50, 100, 200 CH) Single Bar Graph Display Difference Frequency Display Frequency Counter Sweep & Hold Modes Free Run, Single Run Squelch Delay(Run, Hold, Stop) Squelch Max. Hold Scan Modes Manual, Search Scan & CH. Memory Marker Marker, Delta Marker, Peak Search, Marker Center Sweep Speed Min.500msec Trigger Source Narrow FM/ Wide FM/AM/SSB Memory Trace Storage 100 Waveforms Setup Storage Display Type 3.5 inch TFT Color LCD Display Resolution 320(RGB)×240 LCD Backlight ALWAYS ON(White LED) Frequency Counter Range 9㎒ ~ 2900㎒ RF Input Connector BNC Type Female, 50ohms(Standard) Digit / Resolution 7 Digit / 1㎑ Accuracy ±50PPM, ±1 Count Sampling Time 0.512 sec.