CLIMAX高压手动注脂枪1699     This specially designed high pressure handgun, light in weight (approximately 16 lb.), is more rugged than most conventional types and meets the exacting demands of plug valve sealants. Because the grease gun is built for servicing plug valves, all parts are machined with minute accuracy. The polished hardened steel piston is perfectly fitted in the high pressure cylinder to provide absolute smoothness of operation. The CLIMAX 1699 is self-priming and can be used in any position. Because of its hydraulic principle, this guns powerful floating piston forces lubricants, sealants, liquids, packing ect. out of the gun regardless of viscosity. The gun is equipped with a CLIMAX 1699 Button Head Coupler for connection to the button head sealant fitting in the shank of the valve. This coupler has a built-in feature which locks it to the fitting when the gun is under positive pressure. The coupler cannot be connected to or separated from the fitting with the gun under pressure. This pressure may be relieved by a turn of the by-pass valve. The by-pass valve should not be closed to a point where it is jammed into its seat, nor should it be opened tight against the stop. The valve should be closed firmly, but not tightly. It is not necessary to open the valve past one full turn. Due to "built-in" safety features, the CLIMAX 1699 provides the maximum safety to both the valve and the gun itself. The hydraulic system of the gun is equipped with a relief fitting to protect the gun from injury if the operator were to continue to pump after the gun had been depleted of valve sealant. Also, to prevent damage to the valve and sealant gun, in the event of sealant clogging the system or the operator pumping too fast, a CLIMAX 15,000 psi gauge is provided. This accessory indicates the point at which sufficient sealant pressure has been developed within the valve. The gauge also indicates valve adjustment and other services required. The CLIMAX psi gauge is the highest quality, most reliable glycerin filled gauge available. The one piece die cast brass case and heavy duty bourdon tube and movement enable the gauge to stand up to the shock and vibration encountered on the most demanding applications. The CLIMAX gauge also features a rubber gauge protector. Climax offers this gun with body drilled and tapped for 1/4" NPT: including psi gauge with protector for pumping valve stem packing - This set-up indicates direct Hydraulic pressure (1699D). In addition to the gauge an external relief valve coupler is provided, pre-set at 7500 psi. A carrying case for the Climax Model 1699 is available. Refer to the parts list for other available options. CLIMAX EXCHANGE   德瑞克10"卡子 德瑞克5"卡子   德瑞克减振弹簧块 BOCK模块空调压缩机马达保护器 HGX8 BCM2000 TOMAR ELECTRONICS 火灾报警站 RMS-6T-EX-WP-LP CONTROLLI执行器 MVB56 德瑞克减振弹簧块 GARLOCK 油封 53X8630 R2 （） 摩菲温度表A20T-OS GARLOCK 油封 53X8630 R2 （） 泰科底座 5B 5” 泰科TYCO 安装基座517.050.603 DHM-5B Nordstrom阀门注脂枪 400-D DNH喇叭BK-560T DNH 扬声器SAFE-10PT DNH  扬声器 HS-8EEXMNT DNH扬声器  HS-15EExmNT Rexroth MNR:R Sperry Marine 磁罗经表盘3 LEWIS安全带  HCB-B FHF防爆电话 本迪克斯 干燥器XJ250 NOV安全阀 TER手柄 PF TER辅助触点开关PRSL1003PI DNH扬声器 BK560-CRT KAG电机M42*20/1 SOLA 24V电源 10A SDN C SOLA 24V电源 20A SDN C SOLA 冗余电源 20A SDN 2.5-20 RED SOLA 冗余电源 40A SDN 30/40RED 威创传感器 5705-BSPX1052 马丁戴克仪表油 W15-1 奥地利E+E 温湿度变送器  EE31-PFTD3025D05/BG6-T26  AUDIOMASTER对讲机 310X-MV ROXTEC支架框 G 6X1 PRIMED ROXTEC备件包 WEDGE KIT GALV ROXTEC插入模块 RM40 ROXTEC插入模块 RM30 ROXTEC插入模块 RM20 WESTLOCK终端版 B-EL       ORGA 15s70400 (012960) Billy Pugh WVO-50 CANRIG编码器 N10260 CANRIG温度传感器隔离栅 N10074 猫牌 2531 不锈钢蓄能器 Hxso.075/25 猫牌 压力表 KG/CM2 cooper震动检测器 P 三阳刹车片 DB-0430-K01A SCHMITZ胶球 24RS15M0