CORTEC 阀板防护油 VPCI-369 19L/桶
深圳前海众合恒达科技有限公司/李小姐/ /QQ
PRODUCT DESCRIPTION VpCI-369 is our best inhibitor for use as an oil additive and/ or temporary coating. The protective film is self-healing and moisture-displacing, providing superior protection against aggressive environments. VpCI-369 is also excellent when used as an oil additive for mothballing, shipping, or storage of parts and equipment. In small percentages, VpCI-369 has a minimal effect on viscosities. VpCI-369 is available prediluted with mineral spirits at the ratio 1:1 as VpCI-369 H, which is recommended for spray can applications. FEATURES • Self-healing • Excellent lubricity • Extends tool life for metalworking operations • Excellent outdoor protection • Excellent oil additive • Dilutable with oil • Meets MIL-PRF-16173E (Grade 2) • NSN • NSN • NSN • NSN TYPICAL APPLICATIONS • Wire rope • Electrical connections/wiring • Sheltered coating • Gear protectant/lubricant • Long-term (5+ years) equipment lay-up • Stamping oil additive • Drawing oil additive • Cylinders • Working/moving parts PROTECTION PROPERTIES METALS PROTECTED • Silver • Cast Iron • Stainless Steel • Copper • Magnesium • Aluminum • Carbon Steel MINIMUM REQUIREMENTS FOR SURFACE PREPARATION NACE SSPC ARS 4 7-63 As low as B-3 Methods for Monitoring: Wet Film Thickness Gauge TYPICAL PROPERTIES Appearance Light beige/tan viscous liquid Film Type Oily Flash Point 233˚F (112˚C) Shelf Life 24 months @ 75˚F (24˚C) Non-volatile Content 95-99% Theoretical Spread Rate ft2/gal @ 1-2 mils (18.8-37.6 m2/l @ 25-50 microns) Viscosity cps Weight per Gallon 7.7-8.4 lb/gal (0.92-1.01 kg/l) Temperature Resistance -108°F to 500°F (Fully Cured) (-78°C to 260°C)