1．应用： 2 application: 用于检测蜂窝结构的脱粘 Used for detecting the debonding of a honeycomb structure 用于检测蜂窝结构的损坏 Used to detect damage to the cellular structure 用于检测蜂窝结构内部镶嵌物的位置和形状 The position and shape of the interior inlay of a honeycomb structure 用于检测分层缺陷 Used to detect delamination defects 用于检测复合材料粘接点的脱粘 Debonding of the adhesive point of a composite material 用于金属材料表面覆盖物的脱粘 Removal of the surface cover for metal materials 注意： Be careful 该仪器主要用于航空材料脱粘缺陷的检测，也适合厚的或多层的蜂窝材料例如FRP或铝材表层检测。 The instrument is mainly used for the detection of the defects of the material, and it is also suitable for the detection of thick or multi-layer honeycomb materials such as FRP or aluminum surface. 对于柔性材料，如橡胶、纸或皮革制品，敲击头的敲击能量会被吸收，在这种情况下很难达到理想的检测效果，另外，当蒙皮的厚度与脱沾尺寸的比值很大时，对缺陷的检出也会非常困难，下图是对一铝蜂窝试块和FRP蜂窝试块进行检测的检测结果，该仪器一般用于对蒙皮厚度小于2mm的材料进行检测 For the flexible material, such as rubber, paper and leather products, hit the head striking energy will be absorbed, in this case it is difficult to achieve ideal effect for detection of. In addition, when the skin thickness and de stained the size ratio is large, defect detection will very difficult. Below is the aluminum honeycomb test block and FRP honeycomb specimen testing results, the instrument is generally used for on skin thickness less than 2mm materials inspection 2．仪器操作： 5 instrument operation: (A) 开始和停止 START健具有开启和关闭仪器的双重功能 开启：按下START健 关闭：再次按下START健 (A) to start and stop the START health with the opening and closing of the dual functions of the instrument open: press START Kin closure: press START again (B) 找到被用来作为参考价值的位置,检查2-3区域范围考虑正确的使用DEBOND和插入模式。 如果绿色灯照明和被鉴定的在DEBONO和插入模块之间是正确的，一个区域范围就能够用来作为参考价值。 (B) to find the location to be used as a reference value, to check the 2-3 area scope to consider the correct use of DEBOND and insert mode. If the green light and the identified DEBONO and the insertion module are correct, an area can be used as a reference value. (C) 对脱粘缺陷的检测方式 将DEBOND/INSERT转换开关调至DEBOND位置 (D) 存储操作 (C) for detection of debond defects in the DEBOND/INSERT switch to DEBOND position (D) storage operation 存储设置 仪器会将一个通过8次敲击后得到的平均值作为参考数值存储到仪器中，该参考值被存入后，仪器上的READY指示灯亮。 The storage device can store a reference value stored in an average value of 8 times as a reference value, and the reference value is stored in the READY indicator light on the instrument. 按动仪器START健，开启仪器，将敲击头放在被检材料的某一区域上，并将在该区域上获得的数值作为参考值。 Push the instrument start health, opens the instrument will knock head placed in a certain region of the test material, and in the region to obtain the numerical value as a reference. 下压并轻轻移动敲击头，以使仪器获得该区域上的一个平均值，直至READY灯亮为止。 至此，该参考数值已被存储。 Press and gently move the tap to allow the instrument to obtain an average value in the area until the READY light is on. At this point, the reference value has been stored. 存储重新设置 Memory reset 在检测过程中仪器的存储可重新设置，设置时，按下存储开关，直到READY灯再次亮。接下来的步骤与存储设置步骤相同。 In the detection process of the storage device can be reset, set, press the storage switch, until the READY light again. The next step is the same as the store setup step. 当按动START健或存储开关后，所存储的的参考数值将被取消。 When pressing the START key or the memory switch, the stored reference value will be canceled. (E) 检测操作 (E) test operation 手持仪器，将仪器轻放在被检材料的表面以固定的方式进行扫描，以保证检测精度，扫描速度保持在16cm/s以下时会得到一个满意的检测结果。 Handheld instruments, the instrument with care in the surface of the test material in a fixed way of scanning, in order to ensure the accuracy of detection, scanning speed to keep in 16cm/s below will get a satisfactory test results. 仪器上的数 Number of instruments 说明： 我司经营所有产品均为进口原厂产品，假一赔十，质量保证，请放心选购！非人为因素，凡我司购买产品均对其主体质保1年；超出质保期限，辅助仅收取成本费用；更多详情联系我们济南沐子商贸！