合肥WP632AM，WP632AM复合检测仪说明
对于蜂窝结构或者板—板粘接结构,当我们用物体轻轻敲击其表面时,粘接质量好的部分与脱粘部分所发出的声音是有区别的,但这种区别非常细微,因此如果用此方法对材料进行检测,则需要检测人员必须具有丰富的经验和高超的检验技巧. For cellular structure or plate plate bonding structure, when we use object tapped on the surface, good adhesion quality and debonding part a voice is different, but the difference is very subtle, so if the materials were detected by this method, you need to testing personnel must have a wealth of experience and superb inspection techniques. WP—632带有独立的CPU,敲击头和传感器安装在锤头下方,采用电池工作,仪器的上面装有发光显示器,可显示工件脱粘的程度. WP - 632 with independent CPU, knock head and sensor is installed under the hammer, the battery work, instrument is arranged on the light emitting display, display the workpiece debonding degree. 另外,将DEBOND/INSERT开关置于INSERT的位置时,仪器还可以对内芯材料的位置和形状进行检测. In addition, when the DEBOND/INSERT switch is placed in the INSERT position, the instrument can also detect the position and the shape of the inner core material. WP—632还可以与WP—632M配合使用,WP—632M是一个可选配的独立的显示单元,可显示和记录和检测数值,同时也可与计算机进行数据传输. WP - 632 can also be used in conjunction with 632M - WP, 632M - WP is an optional independent display unit, can be displayed and recorded and detection value, but also with the computer for data transmission. WP—632独特的设计原理使其可以在任何的噪声环境中使用,同时始终保持检测信号的连续显示. WP - 632 unique design principles that can be used in any noise environment, while always maintaining the continuous detection of the signal display. Features Features 体积小巧,紧,重量轻 Compact size, compact, light weight 操作简单 Simple operation 可定量显示缺陷大小 Quantitative display size 与WP—632M配合使用可对检测数据进行存储和传输 With 632M - WP can be used for the detection of data storage and transmission of data 可在任何噪声环境中使用 Can be used in any noise environment Applications Applications 检测蜂窝材料内部的脱粘缺陷 Detection of debonding defects in honeycomb materials 检测内芯材料的位置和形状 Position and shape of the inner core material. 检测复合材料的分层脱粘 Detection of delamination in composite materials 检查复合结构粘接部分的粘接质量 Inspection of the bonding quality of the composite structure 确定结构内部框架的位置 Determine the location of the internal frame of the structure 检测金属与金属之间的粘接质量 To detect the bonding quality between metal and metal. Particular Particular 尺寸: 100mm(H)×46mm(W)×276mm(L) Dimensions: 100mm (H) * 46mm (W) * 276mm (L) 重量：470g Weight: 470g 电源：采用４节假日号电池供电 Power supply: the use of 4 holiday number battery power 电源功耗：１瓦 Power consumption: 1 watts 电池寿命：约10小时 Battery life: about 10 hours "说明： 我司经营所有产品均为进口原厂产品，假一赔十，质量保证，请放心选购！非人为因素，凡我司购买产品均对其主体质保1年；超出质保期限，辅助仅收取成本费用；更多详情联系我们济南沐子商贸！"