30%长玻纤增强尼龙6  30% long glass fiber reinforced PA6 项目Item 典型性能Typical Characteristic 测试标准Testing Standard 值Value 单位Unit 机械性能Mechanical Properties  拉伸强度Tensile Strength 170 MPa ISO527, 50mm/min 断裂伸长率Elongation at break 3.2 % ISO527, 50mm/min 弯曲强度Flexural Strength 235 MPa ISO178, 2mm/min 弯曲模量Flexural Modulus 7850 MPa ISO178, 2mm/min 简支梁缺口冲击强度 Charpy Impact notched 13.6 KJ/m2 ISO179/1eA 简支梁无缺口冲击强度 Charpy Impact unnotched 90 KJ/m2 ISO179/1eU 洛氏硬度Rockwell Hardness 119   IS 热性能Thermal Properties       热变形温度 Temp. of deflection under load (0.45MPa)   ℃ ISO75 热变形温度 Temp. of deflection under load (1.80MPa) 210 ℃ ISO75 熔点Melting Point 220 ℃ ISO3146C 电性能Electrical Properties       体积电阻率Volume Resistant   ohm*m IEC60093 表面电阻率Surface Resistant 1013 ohm IEC60093 介电强度Dielectric Strength   KV/mm IEC 电痕化指数Comp Track Index   V IEC 60112 其它Others       密度Specific Gravity 1.36 g/cm3 ISO1183 灰分Ash Content 30±2 % IS 熔体流动速率（250℃,2.16kg） Melt flow rate   g/10min ISO62 吸水率Water Absorption 1.9 % ISO62 吸湿率Humidity Absorption 0.3 % ISO62 模塑收缩率Mold Shrinkage 0.1/0.5 % ISO294-4 燃烧性能       UL垂直燃烧Flammability HB mm/Class UL-94 灼热丝可燃指数 Glow-wire Flammability Index