联系人： 李 小姐
公司：深圳前海众合恒达科技有限公司
地址：深圳市前海深港合作区前湾一路1号A栋201室
电话：
QQ：
he TM0782A-K accelerometer kit consists of one accelerometer and one 5 meter cable. This accelerometer kit directly interfaces with ProvibTech’s signal conditioners: DTM, TR transmitters, DM Dual Monitors and PT580 vibration switches to measure case vibration in acceleration or velocity. Specifications Electrical Sensitivity: 100mV/g, @ 25 o C, ±10% Frequency Response: 0.5 - 10,000Hz (±3dB) Acceleration Range: 50g Isolation: Fully isolated Electrical Noise: 0.0007g Power Requirement: 2 - 10mA constant current 18 - 30VDC Bias Voltage: 10 - 14VDC Order Information TM0782A-M Accelerometer with mounting screw 1/4-28” to M6×1 TM0782A-E Accelerometer with mounting screw 1/4-28” to 1/4-28” TM0782A-K-M Accelerometer kit includes: TM0782A accelerometer Mounting screw (1/4-28” to M6×1) TM TM0782A-K-E Accelerometer kit includes: TM0782A accelerometer Mounting screw (1/4-28” to 1/4-28”) TM TM0782A-M-S Accelerometer with mounting screw 1/4-28” to M6×1 Hazardous area approval TM0782A-E-S Accelerometer with mounting screw 1/4-28” to 1/4-28” Hazardous area approval TM0702-XX: Aluminum MIL connector with XX meters cable, 7mm diameter. < 120 o C (250 o F) TM0703-XX: Seal tight boot connector with XX meters cable, 7mm diameter. < 120 o C (250 o F) TM0704-XX: Stainless steel MIL connector with armored XX meters cable, 7mm diameter. < 150 o C (300 o F), Maximum Length is 10 meters. TM0705-XX: Cornered MIL connector with armored XX meters cable, 7mm diameter. < 120 o C (250 o F), Maximum Length is 10 meters. TM0710: Mounting screw 1/4-28” - M6×1 TM0711: Mounting screw 1/4-28” - 1/4-28” TM0712: Mounting screw 1/4-28” - M8 TM0713: Mounting screw 1/4-28” - M10