深圳市汉斯福特科技有限公司
杨工
座机：
手机：
传真：
Q Q:
公司地址：龙华新区大浪街道大浪社区伟达工业园A栋2楼
概述
金属硬度测量最早由雷奥姆尔提出硬度定义：表示材料抵抗硬物体压入其表面的能力。它是金属材料的重要性能指标之一。一般硬度越高，耐磨性越好。Available Scales: A, B, C, D, DO, O
CHECK-LINE HP Series durometers are designed to measure the hardness or firmness of a wide variety of parts and test samples. This unit is designed in accordance with ASTM and DIN quality standards which specify the bottom contact area (working diameter), sensing pin configuration and internal spring forces. Additionally, the displacement of the sensing pin, relative to the dial indicator, is specified by these standards.
The Checkline HP Series provides an analog dial indicator calibrated for a range of 0-100 Shore units, an optional memory pointer is available to record the highest recorded reading.
All CHECK-LINE Durometers feature a unique spring-operated test pressure shell, which helps assure that similar test pressures are used for each measurement. This system significantly enhances the measurement repeatability, especially between different operators.
Oversized flat bottom surface makes position of working face (area of contact as specified in ASTM/DIN Standards) convenient and consistent which limits variability between operators.
参数
|
Worldwide Standards |
According to DIN 53505 ,ISO 7619, ISO 868 and ASTM D 2240 |
|
Display range |
0 - 100 Scale |
|
Scale diameter |
56 mm |
|
Weight, net (gross): |
approx. 300 g (500 g) |
|
Dimensions |
50 x 50 x 110 mm (L x W x H) |
订货清单
The HP series is supplied as a complete kit including gauge and instruction manual in a foam-fitted carrying case.