CHECK.LINE仪器_移动志趣网

美国CHECK.LINE测厚仪

DCF-900涂层/涂膜/镀层测厚仪深圳市汉斯福特科技有限公司杨工座机：手机：传真： Q Q: 公司地址：龙华新区大浪街道大浪社区伟达工业园A栋2楼概述 Measuring Range 0-40.0 mils (0-999 µm) DCF-900 measures the thickness of paint, plating, coatings and galvanizing on iron or steel...more accurately, dependably and economically! 涂层测厚仪采用电磁感应法测量涂层的厚度。位于部件表面的探头产生一个闭合的磁回路，随着探头与铁磁性材料间的距离的改变，该磁回路将不同程度的改变，引起磁阻及探头线圈电感的变化。利用这一原理可以精确地测量探头与铁磁性材料间的距离，即涂层厚度。涂层测厚仪具有两种测量方式：连续测量方式（CONTINUE）和单次测量方式（SINGLE）；具有两种工作方式：直接方式（DIRECT）和成组方式（APPL）；特性 Dependable accuracy over the entire range of the gauge, not just at "calibration check" points. Keypad-selectable English or metric units. Continuous reading update detects soft coatings as probe tip "sinks" into them. The DCF-900 includes the gauge and probe, a bare test plate, two precision calibration shims & instructions, all in a foam-fitted carrying case. Calibration to NIST-Traceable standards is available upon request. Remote probe permits easy access for difficult, hard-to-reach places. Longer lasting, driftless calibration... Set it and forget it for long periods of time and from job to job Very reliable operation... Consistent, repeatable measurements Excellent results with thin substrates... As thin as 0.005" (10 µm) 超声波测厚仪：超声波测厚仪是根据超声波脉冲反射原理来进行厚度测量的，当探头发射的超声波脉冲通过被测物体到达材料分界面时，脉冲被反射回探头，通过精确测量超声波在材料中传播的时间来确定被测材料的厚度。凡能使超声波以一恒定速度在其内部传播的各种材料均可采用此原理测量。参数 Range: 0.1-40.0 mils (0-999 µm) Resolution: 0.1 mil (1 µm) Accuracy: 0-10 mils: ±0.1 mil 10-40 mils: ±1% of reading Probe: Monopolar, magnetic induction, 0.4" (10 mm) dia., spring-loaded, with V-notched shell and 28" (70 cm) cable Battery/Life: 9 V alkaline/approx. 6 months normal use, with auto shutoff after 90 seconds of non-use. Dimension: 5.7" x 3.1" x 1.5" (145 x 79 x 38 mm) Weight: 9 oz. (250 g) Temperature Limits: Material: 15 to 140° F (-10 to 60° C) Ambient: 32 to 125° F (0 to 50° C) Warranty: One (1) year 涂层测厚仪采用电磁感应法测量涂层的厚度。位于部件表面的探头产生一个闭合的磁回路，随着探头与铁磁性材料间的距离的改变，该磁回路将不同程度的改变，引起磁阻及探头线圈电感的变化。利用这一原理可以精确地测量探头与铁磁性材料间的距离，即涂层厚度。涂层测厚仪具有两种测量方式：连续测量方式（CONTINUE）和单次测量方式（SINGLE）；具有两种工作方式：直接方式（DIRECT）和成组方式（APPL）；订货清单 The DCF-900 is supplied as a complete kit including gauge, ferrous zero plate, 2 plastic test shims and instruction manual in a foam fitted, hard plastic carrying case. 配件 NISTCAL NIST Traceable Calibration Certificate 订货型号 DCF-900 DCF-900 Coating Thickness Gauge, Ferrous, Complete Kit