：
铝箔贴面玻璃棉卷毡,施工建议：外在设备表面提前焊上销钉，再用铁丝把高温玻璃棉捆绑在设备表面，当所需保温的设备温度超过250℃时，采用双层保温模式，内外两层玻璃面的接缝应错开，以免产生热桥造成热量损失。当所需保温的设备温度超过400℃时，建议内层用一定厚度的硅酸铝，外层用耐高温玻璃棉，两层之间的接缝也应错开。最后在外面包上外裹层，既可保护玻璃棉，又达到美观的要求形整洁美观，具有较强的抗热辐射能力，是高温车间，控制室，机房内壁，隔间及平顶极好的内衬材料。
Aluminum foil cover glass cotton roll-the uniform felt, construction proposal: external surface of the equipment, and then welded the pin in advance with wire bound in the high temperature glass cotton equipment surface, when the equipment needed more than 250 heat temperature ℃, had better use double insulation model, the internal and external two layers of glass should be staggered joint, lest produce thermal bridge cause heat loss.
When the equipment needed for insulation, more than 400 ℃ temperature with a certain thickness suggestion inner and outer aluminum silicate with high temperature resistant glass cotton, between two layers of juncture should also stagger. Finally outer bread outside wrapped layer, not only protect the glass cotton, and achieve beautiful and requirements. form neat and beautiful, with strong thermal radiation ability, is high temperature workshop, control room, computer room wall, compartment and flattened excellent lining materials.
