美孚力图H是一系列高品质矿物基循环油，包含抗锈蚀和氧化抑制剂以及抗泡添加剂。美孚力图H 油品适用于液压 和循环系统及其他要求润滑油寿命长、但对极压或抗磨没有要求的工业应用。 美孚力图H油品分为ISO 32 至 100 四个粘度等级。 美孚力图H油品抗乳化性好，可以在油箱中迅速将水分离，不与机油一起循环。 美孚力图H高品质油品用于机油 要进行长期的循环或再用的工业应用。 特性与优点 美孚力图H系列润滑油是埃索品牌液压与循环油的一个系列，以其高品质和可靠性及高性能受到认可。 本系列产品是按最严格的质量标准进行生产。 美孚力图H系列油品具有以下主要优点： 1、严格按照我们的产品质量管理系统 (PQMS) 的质量控制标准生产。 2、满足广泛的工业应用要求。 3、分水性极佳，可在循环系统中提供无故障润滑。 4、氧化稳定性和抗腐蚀性好，达到换油周期长和设备保护的目的。 应用范围 美孚力图H系列循环油能够为广泛的工业循环润滑系统提供可靠润滑。美孚力图H系列油特别适用于： 1、液压动力和控制系统 (ISO VG 32-68) 2、密闭齿轮、链条传动、多种压缩机及其他不要求抗磨和极压添加剂的应用 3、电动机、泵、纺织机械和机械工具之类设备的滑动与减摩轴承 It is a series of high quality mineral based circulating oils containing anti-rust and oxidation inhibitors and anti-foam additives. The oil products are applicable to hydraulic and circulatory systems and other industrial applications that require long life of lubricating oil, but are not required for extreme pressure or abrasion resistance. The oil products are divided into ISO 32 to 100 four viscosity grades. The oil products are resistant to emulsification and can quickly detach the water from the tank and not cycle with the oil. It is recommended for high quality oil products to be used for long-term cycle or reuse of industrial applications. Characteristics and advantages The "H series" is a series of hydraulic and circulating oil of esso brand, which is recognized for its high quality and reliability and high performance. This series of products is produced by the most stringent quality standards. The main advantages of the oil products are: 1. Strictly follow the quality control standard of our product quality management system (PQMS). 2. Meet the requirements of a wide range of industrial applications. 3. Excellent water-based ability, which can be provided with no trouble lubrication in circulation system. 4. Good oxidation stability and corrosion resistance, achieve the purpose of oil change cycle length and equipment protection. Range of application The series of the H series of oil is able to provide reliable lubrication for a wide range of industrial circulation lubrication systems. The oil special application for the H series oil is suitable for: 1. Hydraulic power and control system (ISO VG 32-68) 2. Closed gear, chain drive, multiple compressors and other applications that do not require anti-wear and extreme pressure additives 3. Sliding and anti-friction bearings of motor, pump, textile machinery and mechanical tools 划词 双语对照