概述
Measuring Range in Steel
0.025 - 6.00 inches
0.60 - 150.0 mm
The Check-Line TI-25M Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The TI-25M can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
The TI-25M probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.
特性
1. Includes NIST Calibration Certificate
2. Resolution of 0.001 inch (0.01 mm)
3. Large, back-lit LCD display retains last reading
4. Simple operator controls virtually eliminate training
5. Special-purpose probes are offered for a variety of applications
6. Switch-selected units for inches or mm
7. For underwater surveying, probe cable lengths up to 50 feet are optionally
8. CE Certified
9. Made in the USA
10. IP 65 Rated
参数
|
Range in Steel |
0.025-6.00" (0.60-150.0 mm) |
|
Resolution |
.001" (0.01 mm) |
|
Display |
4½ - Digit, 0.5" Back-lit LCD |
|
Velocity Range |
0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec |
|
Probe |
7.5 MHz, 0.25" Diameter (6.35 mm) |
|
Cable |
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
|
Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C) |
|
Battery Type |
Two AA batteries |
|
Battery Life |
200 hours |
|
Weight |
7 ounces (196 g) |
|
Size |
2.5 x 4.5 x 1.25" |
|
Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
|
Warranty |
Gauge: 5 Years |