5850B脉冲锤
概述
The Dytran 5850B is a general purpose IEPE impulse hammer used to excite structures or machinery with a definable impulse force. The impulse is used to identify resonances, an important measurement parameter for the study of dynamic behavior, as well as to help determine the overall structural health of a test specimen. The model 5850B features a 3-position toggle switch located on the hammer handle, which allows the user to select from 3 different sensitivities for use with test objects of varying size. Larger testing structures require higher force levels for adequate excitation while tiny structures require much lower force levels. Thus, a wide range of sizes of objects or structures can be tested with this versatile hammer. Sensitivities available are 1, 10 and 100 mV/lbf. The Dytran model 5850B features a 150 gram head weight and is supplied with three interchangeable impact tips.
The Dytran DynaPulse™ impulse hammers incorporate a special acceleration compensated piezoelectric force sensor in the hammer head at the striking face, ensuring a smooth frequency spectrum that is free from anomalies. Electrical connection is achieved via a BNC connector jack located at the end of the hammer handle.
特性
1. Selectable sensitivity ofr 100 mV/lbf
2. Selectable range ofr 5,000 lbf
3. Maximum force between 1,000 and 8,000 lbf
4. BNC connector
5. 150 gram head weight
6. IEPE
应用
1. Machinery parts
2. MIMO test
3. Modal and structural analysis
4. Root cause failure analysis
5. General purpose use on car frames, bearing housings, brake rotors, I-beams, plates and other small-to-medium sized structures and machinery
参数
SPECIFICATION VALUE UNITS
SWITCH POSITION
RANGE (for +5V out Lbs F
SENSITIVITY, ± mV/Lb
MAXIMUM INPUT FORCE00 Lbs F
DISCHARGE TIME CONSTANTSec
COMMON SPECIFICATIONS, ALL RANGES
STIFFNESS, SENSOR 11.4 Lbs F/μ in.
RESONANT FREQUENCY >75 kHz
LINEARITY ±1 %FS
OUTPUT IMPEDANCE, MAX 100 Ohms
VOLTAGE BIAS +7.5 to +12 VDC
SUPPLY (COMPLIANCE) VOLTAGE RANGE +18 to +30 VDC
SUPPLY CURRENT RANGE 2 TO 20 mA
MATERIAL, HEAD/HANDLE STAINLESS STEEL/FIBERGLAS
WEIGHT, HEADGrams/Ounces
WEIGHT, TOTALGrams/Ounces
CONNECTOR, MODEL 5850B BNC JACK, COAXIAL
配件
Supplied Accessories: (1) model 6250A aluminum impact tip, (1) model 6250P plastic impact tip, (1) model 6250PS soft plastic impact tip
Recommended Accessories: model 4114B1
Compatible Cables: 6055A, 6089A
订货型号
5850B
