1050C高温力传感器
概述
The Dytran 1050C is a piezoelectric charge mode force sensor, designed to measure both compressive and tensile forces from 10 tlbf over a wide frequency range. Offered with a sensitivity of 18 pC/lbf, this dynamic force sensor can measure up to 500 lbs full scale in tension mode, with reliable high temperature operation to +500°F (+260°C).
Design of the model 1050C features a quartz shear sensing element, operating in compression mode and packaged in a rugged stainless steel housing for an overall weight of 32 grams. Units incorporate a 10-32 axial connector and atapped hole located at the top of the sensor housing for ease of mounting.
特性
1. 18 pC/lbf sensitivity
2. 5,000 lbf compression range
3. 500 lbf tension range
4. lbf maximum compression
5. 1,000 lbf maximum tension
6. 10-32 axial connector
7. tapped hole top surface
8. 32 grams
9. Stainless steel
10. +500°F (+260°C) operation
11. Charge mode
应用
1. Modal analysis
2. Process control
3. General purpose dynamic force measurement
参数
SPECIFICATION VALUE UNITS
SENSITIVITY, ±pC/Lb F
WORKING COMPRESSION RANGE 5,000 Lb F
MAXIMUM COMPRESSION FORCELb F
MAXIMUM TENSION FORCELb F
STIFFNESS 11.4 Lb/m In
MOUNTED RESONANT FREQUENCY, UNLOADED 75 kHz
LINEARITY [2] +/- 1 %F.S.
F.S. OUTPUT VOLTAGE, NOM. 5 VOLTS
MAX SHOCK, UNLOADEDG's
MAX. VIBRATION, UNLOADED +G's
COEFFICIENT OF THERMAL SENSITIVITYF
TEMPERATURE RANGE -100 to +500 oF
ENVIRONMENTAL SEAL WELDED/EPOXY
CAPACITANCE, NOM. 18 pF
INSULATION RESISTANCE 1 X 1012 Ohms
CASE MATERIAL STAINLESS STEEL
WEIGHT 32 GRAMS
MOUNTING PROVISION, TOP AND BOTTOMx .175 DEEP
ELECTRICAL CONNECTOR, RADIAL 10-32 COAXIAL
配件
Supplied Accessories: (2) model 6204 mounting studst) model 6210 impact cap
Recommended Accessories: model 4110C current source power unit, model 4751B in-line charge amplifierjack tjack)
Compatible Cables: 6013A, 6019A
订货型号
1050C 高温型力传感器
1050V1 IEPE型自动放大器
1050V2 IEPE型自动放大器
1050V3 IEPE型自动放大器
1050V4 IEPE型自动放大器
1050V5 IEPE型自动放大器
1050V6 IEPE型自动放大器
