全自动晶圆研磨机（Wafer Grinding）GDM300衡鹏
——又称晶圆抛光/晶圆背抛/晶圆减薄
全自动晶圆研磨机/Wafer Grinding GDM300概要：
GDM300 Wafer Grinding is a fully automatic continuous downfeed grinding machine with dual polishing stations for increased throughput. Wafers are handled through the machine by a 6-axis robot, and load/unload arms designed for 25 um capability. An optional edge trimming system is recommended for eliminating edge chipping for thin wafers. Chuck speed, grinding wheel, and grind spindle downfeed rate speeds can be used to manipulate grinder throughput, surface finish, and wheel life. A two-point in-process gauge measuring system controls wafer thickness under grind spindles 1 and 2 with an optional laser detection for a more precision thickness accuracy (recommended for < 50 um). Programmable oscillating polish heads can be programmed to maintain wafer profile (ttv) in conjunction with with the optional motorized spindle angle adjustment. After completion at grind and polish, wafer is automatically transferred by robot to the mounter unit for UV exposure, detape, and mount. Pre-cut DAF feature is optional while single DAF is included. Coin-stack feature may be integrated. The local polishing unit removes subsurface damage for increased wafer die strength and the ability to handle final thickness of 25 microns.
GDM300晶圆研磨机（Wafer Grinding）特长：
·The process from back grinding to wafer mounting continuously by fully automatic system, Which enable to grind till 25um thickness.
·With 2 head polishing stage, throughput is almost double compared with 1 polish head system.
·Built in edge trimming system is available as an option for thin wafer process.
·Dual index system, which polishing stage and grinding stage is completely separated, satisfy the cleanness required for TSV and MEMS process.
·Less than Ra1A ultra luminance, ultra mirror surface is possible.
全自动晶圆研磨机（Wafer Grinding）GDM300相关产品：
衡鹏供应
晶圆研磨/晶圆减薄/晶圆抛光/晶圆背抛/Wafer Grinding GNX200BP