FG7002C信号发生器详细说明
产品规格
FG-7005C FG-7002C
FREQUENCY Output Waveform Sine,Triangel,Square,Pulse,Sawtooth,TTL,CMOS
Frequencu Range 0.05MHz~5MHz in the 7 Ranges 0.02Hz~2MHz in the 7 Ranges
Frequncy Accuracy ±1 count
EXTERNAL
FREQUENCY
CONTROL(VCF) Input Voltage 0 to 10V(DC+AC peak)
Frequency Variable Range 100:1 or More
DC Offset ±10V(Without Load),±5V(With Load)
Symmetical Variable Range 10:1 to 1:10 or More
SINE WAVE Distortion Less than 1% (0.2Hz~100KHz)
SQUARE WAVE Rise/Fall Time Less than 25ns Less than 110ns
TRLANGLE WAVE Linearity Less than 1% to 100KHz,Less than 5% to2MHz
TTL OUTPUT Output TTL level
Rise/Fall time Less than 25ns
CMOS OUPUT Output 4V~15V±1V,Continuously Variable
Rise/Fall time Less than 40ns(at Max,output level) Less than 110ns(at Max, output level)
SWEEP Width 1:1to 100:1
Rate 20ms to 2s(50Hz to 0.5Hz)
Intemal Sweep Linear
Extemal Sweep By means of VCF input
OUTPUT Output Voltage 20Vp-p(Open circuit),10Vp-p(into 50Ω）
Attenuator -20dB
Impedance 50Ω±5%
FREQUENCY COUNTER Display 6 digit green LED(0.2Hz~50MHz)
Accuracy ±Timebase Error±1 count
Input sensitivity KHz:100mV,MHz:300mV
Max.Input voltage 150Vrm(at 1KHz)
GENERAL Operating Envirnoments 00C~400C,85% RH
Ranges for Guaranteed 250C±500C,70% RH
Power Requirement AC V ±10%,50/60Hz
Power Consumption Approx.20W
Dimension(mm) 255(W)×80（H）×260（D）
Accessories Power Cord,BNC C able,Fuse, Operator"s Manual
