洛阳广通管件设备有限公司单球体全平面法兰密封可曲挠橡胶接头XTQ1FF厂家定制加工。
产品说明：是由织物和金属材料增强的橡胶件与法兰或平行活接头组成。按橡胶件的使用性能分为普通类（适用于输送0-60℃的水）；特种类（The rubber joint is composed of a fabric and a metal material reinforced rubber part and a flange or a parallel joint. According to the rubber parts of the use of the property is divided into ordinary type (applicable to transport 0-60 C); special category
适用于特殊性能要求，如耐油、耐寒、耐臭氧、耐磨或耐化学腐蚀）；耐热类（适用于输送温度高于60℃的水）；按结构形式的不同分为单球体、
Suitable for special performance requirements, such as oil resistance, cold resistance, ozone resistance, wear resistance or chemical corrosion resistance, heat resistance (applicable to transport temperature is higher than 60 C); according to the structure of the different forms of a single sphere,
双球体、弯头三种，每种形式可分为同心同径、同心异径和偏心异径三类，按产品与管道连接形式可分为法兰连接和螺纹连接两种，按工作压力可
Double sphere, elbow three, each form can be divided into concentric diameter, concentric diameter and eccentric three categories, according to the product and pipeline connection form can be divided into two kinds of flange connection and screw connection, according to the work pressure can be
分为0.25、0.6、1.0、1.6、2.5MPa五档。橡胶接头实用性强，广泛用于给水排水、暖通空调、消防、化工、制药、造纸、船舶、水泵、风机、压
Divided into 0.25, 0.6, 1, 1.6, 5 2.5MPa. Rubber joints are widely used in water supply and drainage, HVAC, fire control, chemical, pharmaceutical, paper making, ship, water pump, fan, pressure, and so on.
缩机等金属管路系统的减震隔振、降低噪音和位移补偿。
洛阳广通管件单球体全平面法兰密封可曲挠橡胶接头XTQ1FF可根本上解决各类管路的接口位移，轴向伸缩及不同心度等问题。2，根据材料不同，可曲挠单球体橡胶接头可制成耐酸，耐碱，耐腐蚀，耐油，耐热等各个品种，适应多种介质和环境。3，材料属极性橡胶，密封性好，重量轻，安装维修方便，使用寿命长，但避免与锋利金属器械接触，以免刺破球体。4，如架空使用可配弹性支架，安装时螺栓要用对角法上紧。5，如管路压力过高时，应用极限螺栓将两端法兰连一起。6，法兰连接标准采GB4216.3-4216.5标准，可另行说明。
产品工作压力等级分 0.6Mpa 1.0MPa 1.6MPa 2.5Mpa
