品牌：RETZ瑞茨/我们一直致力于流体控制和测控领域的持续创新，始于2005……
压铸铝气动执行器作为工业自动化控制系统中的重要执行机构，可远距离集中控制能满足计算机程控的需要；如今在石油化工、燃气设备、电力装备、环保水处理、暖通空调、钢 铁冶金、工业窑炉、罐装设备、酿酒设备、干燥设备、真空设备、表面处理、生物制药、食品机械行业中得以广泛应用
As an important actuator in industrial automation control systems, die-casting aluminum pneumatic actuators can be remotely and centrally controlled to meet the needs of computer programming; Nowadays, it is widely used in petrochemical, gas equipment, power equipment, environmental water treatment, HVAC, steel metallurgy, industrial kilns, canned equipment, brewing equipment, drying equipment, vacuum equipment, surface treatment, biopharmaceutical, and food machinery industries
进口压铸铝气动执行器产品详情 Product details
压铸铝质缸体，产品轻巧、外观优美，内表面细磨精加工，内部和外部均采用高级防腐技术，气缸摩擦系数小，使用寿命长，抗腐蚀性能强
Die casting aluminum TYG body with both internal and external corrosion protection having honed cylinder surface for longer life and low coefficient of friction.
双活塞齿轮齿条式设计，结构紧凑、安装位置对称、改变输出轴转向方便，使用寿命长、动作迅速。活塞齿条背面装有复合轴承及导向环，动作精确、摩擦系数小、使用寿命延长。
Dual piston rack and pinion design for compact onstruction,symmetric mounting position,high-cycle life and fast operation,reverse rotation can be accomplished in the field by simply inverting the pistons.Multiple bearings and guides on racks and pistons,low friction,high cycle life and prevent shaft blowout.
组合式预负荷镀层弹簧，工作寿命长。高精度齿轮和齿条，啮合间隙小、精度高，输出功率大。不锈钢紧固件，安全美观，抗腐蚀性强。
Modular preloaded spring cartridge design,with coated spring for simple versatile range,greater safety and corrosion resistance,longer cycle life. Fully machined teeth on piston and pinion for accurate low backlash rack and pinion engagement,maximum efficiency,stainless steel fasteners for long term corrosion resistance.
进口压铸铝气动执行器零部件材质 CTA pneumatic actuator parts and materials
NO. Part Name零件名称 Quantity数量 Material 材质
1 Indicator Nut 指示螺帽 1 ABS
2 Indicator 指示器 1 ABS
3 Indicator 指示表 1 ABS
4 Elastic Ring 弹性挡圈 1 Ss301
5 Shim 垫片 1 POM
6 Wear Pad 耐磨垫片 2 POM
7 Shaft Type O Ring 轴上O型圈 1 NBR
8 Wear Resistant Ring 耐磨环 1 POM
9 Adjusting Cam 调节凸轮 1 WCB
10 Output Shaft 输出轴 1 C45
11 Wear Resistant Ring 耐磨环 1 POM
12 Shaft Under the O Ring 轴下O型圈 1 NBR
13 End Cap Bolt 端盖螺栓 8 Ss301
14 Left End Cover 左端盖 1 Die casting Alu
15 Spring Set 端盖O型圈 2 NBR
16 End Cover Type O Ring 弹簧组 12 55Crsi
17 Wear Resistant Ring 耐磨环 2 POM
18 Piston Seal Ring 活塞密封圈 2 NBR
19 Piston 活塞 2 Die casting Alu
20 Piston Guide Shoe 活塞导向瓦 2 POM
21 Guide Block 导向块 2 PA66
22 Bolt with O Ring 调节螺栓O型圈 2 NBR
23 Shim 垫片 2 Ss301
24 Nut 螺帽 2 Ss301
25 Adjusting Bolt 调节螺栓 2 Ss301
26 Right End Cover 右端盖 1 Die casting Alu
27 Cylinder Body 缸体 1 Die casting Alu
